All products over $200 ship with UPS Ground for free!

Replacement Filter for ICS-ST Sediment and Chlorine Filter

$237.00

Item Number: ICS-STK

Water Treatment Filter For;

  • Removing sediment and particles to clarify water
  • Filtering oxidized (colored) iron and manganese
  • Protecting downstream water treatment processes
  • Chlorine Taste and odor
See More Like This

Description

Sediment Chlorine Water Filter Combo Replacement Kit

Download and Print Specifications

The Cascadian ICS-STK Sediment Chlorine Water Filter Combo Replacement Kit for the ICS-ST first removes sediment and particles from your water to clarify it then removes chlorine to improve taste and odor in a single treatment system.

Smaller size, lower cost and simpler to maintain compared to traditional sediment and taste & odor treatment systems.

Works over a wide pH range.

No salt or power required.

Produces no waste water.

If you are looking for chlorine reduction and softening in one system please see our ICS-TP

If you are looking to add softening to the ICS-ST please see our ICS-STP

Warning in the State of California;    WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

ICS-ST Cascadian Sediment Filter and Taste & Odor Filter Replacement Cartridge Kit

Dimensions: 4.5″ x 20″
Max. Capacity: 12 Months
Best Treatment Flow: 4-8 gpm
Max. Flow: 15 gpm
Max. Pressure: 90 psi
Max. Temperature: 100° F
Number of Filters: 2

 

Notes:

  1. Included bottom drain makes changing filters simple, easy and quick

Click / Press Here to View Installation Instructions

Raw Water Parameters / Conditions for Operation

Bacteria: None Allowed
Chlorine: <3 ppm
Colloidal Iron: NA
Hardness: NA
Hydrocarbons, oils, or lubricants: None Allowed
Hydrogen Sulfide: None Allowed (use ICS-H to remove)
Iron & Manganese (Clear Only): None Allowed
Iron & Manganese (Colored): <1 ppm
Iron Bacteria: None Allowed
Organic Iron: None Allowed
pH:
 >6.8 and <8.5
Sediment: >5 micron
Silica: NA
Tannin / Organics: NA
Turbidity: Less than 1 NTU

 

Notes for all ICS systems:

  • DO NOT INSTALL ON WATER THAT IS MICROBIOLOGICALLY UNSAFE
  • If Raw Water Parameter Condition for Operation = “NA” the systems will not affect and is not affected by concentrations of that parameter typically found in drinking water
  • If Raw Water Parameter Condition for Operation = “None Allowed” Remove through adequate pre-treatment
  • If Raw Water Parameter Condition for Operation = “Not for extreme levels” The cartridge useful life may be shortened and require more frequent replacement.
  • Extreme levels of any parameter may shorten useful cartridge life
  • Stated “Max Capacity” may be reduced by overall raw water chemistry

Complete treatment with the ICS-ST is a two-step process.

Step 1. Water is first filtered through a specially designed activated carbon filter improves water quality by filtering out objectionable chlorine taste and odor. Your water will be much more pleasant to drink and cook with and to bath in. The filter is not recommended as stand-alone treatment for hydrogen sulfide, rotten egg smell or for waters containing chloramine.

Step 2. Next water is filtered through a specially designed activated carbon filter improves water quality by filtering out objectionable chlorine taste and odor. Your water will be much more pleasant to drink and cook with and to bath in. The filter is not recommended as stand-alone treatment for hydrogen sulfide, rotten egg smell or for waters containing chloramine.

How to change your filter

How to change your filter cartridge

 

How to find your system model number

 

Pin It on Pinterest