Shop All Products

All orders over $200 ship for free!

Replacement Water Filter Fits NuvoH2O Home


Item Number: ICS-SP1222K

Filter Sediment and Soften with 1 Cartridge

A perfect upgrade to the NuvoH2O Home filter.
PolyHalt® Salt Free Water Softener with Sediment Filter.
Lasts 1 full year (twice as long as the NuvoH2O Home filter).

Whole House Water Filter For;

  • Clarifying by filtering sediment and particles down to 5 Micron
  • Hard water problems – white spots and mineral deposits
  • Clear iron and manganese staining – red/orange/brown and black
  • Copper staining – blue/green
  • Low pH/aggressive water
  • Appliance protection
  • Silica etching and pitting (spots won’t come off glass surfaces)



Autoship & Save 10%: Today and on all future filters!

Learn more about Autoship

See More Like This

Have you tried our NEW Filter Finder?

In a few seconds, it will tell you exactly which water system is right for you!

Compared to Nuvo

*2x Longer Life
*Does More
*Works Better
*Fits Perfectly

The Cascadian Nuvo Home Water Filter Replacement Kit (ICS-SP1222K) is a perfect fit replacement and upgrade to NuvoH2O Home series housings. No change to Nuvo housing required. Adds sediment filter, lasts twice as long and treats more problems.

ICS-SP1222K filters are specially designed to combine two processes into one physical filter. Water is first filtered to remove sediment then its treated with PolyHalt® using PolyCor™ technology to eliminate the need for a second filter. Treatment with PolyHalt® sequesters hardness minerals preventing them from being able to cause the problems they would if left untreated.

PolyHalt® treatment protects plumbing, fixtures, and appliances from damages caused by corrosive or low pH water. Without using salt, power or producing waste water PolyHalt® treated water, in many ways, behaves as though the metals are not present at all. Your PolyHalt® treated water will not stain, soap scum will not form on tubs, showers, and sinks and water spots will easily clean up. PolyHalt® will also prevent blue/green staining caused by copper and etching and pitting caused by silica.

Warning in the State of California;    WARNING: Cancer and Reproductive Harm –

Raw Water Parameters / Conditions for Operation

Hardness: Max 25 grains (427 ppm)
Hydrocarbons, oils, or lubricants: None Allowed
Hydrogen Sulfide: None Allowed (use ICS-H to remove)
Iron & Manganese (Clear Only): <6 ppm Combined
Iron Bacteria: None Allowed
pH: Between 6.0 and 8.5
Sediment: 5 micron
Silica: <100 ppm
Tannin: None Allowed
Turbidity: Less than 1 NTU


Notes for all ICS systems:

  • If Raw Water Parameter Condition for Operation = “N/A” the systems will not affect and is not affected by concentrations of that parameter typically found in drinking water
  • If Raw Water Parameter Condition for Operation = “None Allowed” Remove through adequate pre-treatment
  • If Raw Water Parameter Condition for Operation = “Not for extreme levels” The cartridge useful life may be shortened and require more frequent replacement.
  • Extreme levels of any parameter may shorten useful cartridge life
  • Stated “Max Capacity” may be reduced by overall raw water chemistry
Why Choose to Autoship?
  • Automatically re-order your favorite products on your schedule.
  • Easily change the products or shipping date for your upcoming Scheduled Orders.
  • Pause or cancel any time.