Shop All Products

All orders over $200 ship for free!

PolyHalt Softener with Chlorine Filter | Point of Use

$269.00

Item Number: ICS-TPU

Point of Use Water Filter System For:

  • Chlorine Taste and odor
  • Hard water – white spots, hard scale buildup, gray dingy hard laundry
  • Staining – blue/green
  • Low pH
  • Appliance protection
  • Silica etching and pitting (spots won’t come off glass surfaces)
  • Replace under sink RO systems

Includes First Cartridge Filter Kit (a $97 value)

 

Autoship & Save 10%: Today and on all future filters!


Learn more about Autoship

See More Like This

Have you tried our NEW Filter Finder?

In a few seconds, it will tell you exactly which water system is right for you!

ICS-TPU Chlorine Taste and Odor Filter with PolyHalt® Ion Bond Softener

System

PolyHalt salt free softener with chlorine filter technology

  • Better tasting and smelling water
    • Removes chlorine and other taste and odor problems (NOT for H2S hydrogen sulfide rotten egg odor, please see the ICS-H water treatment system).
  • PolyHalt® soft water:
    • Saltless water softener
    • Easier cleaning and maintaining of home or business
    • Brighter, whiter, softer laundry
    • Soaps, shampoos, conditioners etc. will work better and you will use less
    • No slippery or slimy feeling
    • Low annual maintenance
    • A legal replacement for salt based water softeners
      • Not subject to any regulations banning or restricting salt softeners including those in California
  • Replace under sink RO (reverse osmosis) systems.

Benefits compared to conventional salt-based water softeners and backwashing filters

  • Eco-friendly treatment
  • Saltless softening
  • No salt added to our environment
  • Produces no waste water
  • No backwash or regeneration cycles
  • Save 1,000's of gallons of wastewater
  • No power required to operate
  • Small size
  • 20 times smaller than typical salt softeners and backwashing media filters
  • Does not take up valuable floor space – system hangs on the wall
  • Simple installation
    • Easy plumbing connections
    • No power required
    • No waste water drain
    • No salt tank
  • Simple maintenance
    • Replace cartridge filter kit every 6 - 12 months depending on use
    • Time required – approximately 15 minutes
    • Includes drain on filter housing for clean no spill easy filter changes
  • Less expensive
    • Lower cost to buy, install and maintain
    • Less time to maintain
    • Save $100’s and 2-3 days each year compared to conventional salt-based softeners

How it works – See “HOW IT WORKS” Tab

Warning in the State of California;    WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Raw Water Parameters / Conditions for Operation

Bacteria: None Allowed
Chlorine: <3 ppm
Colloidal Iron: NA
Hardness: 15 grains (256 ppm)
Hydrocarbons, oils, or lubricants: None Allowed
Hydrogen Sulfide: None Allowed (use ICS-H to remove)
Iron & Manganese (Clear Only): <6 ppm Combined
Iron & Manganese (Colored): NA
Iron Bacteria: None Allowed
Organic Iron: None Allowed
pH:
 Between 6.0 and 8.5
Sediment: NA
Silica: <50 ppm
Tannin / Organics: None Allowed
Turbidity: Less than 1 NTU

Notes for all ICS systems:

  • DO NOT INSTALL ON WATER THAT IS MICROBIOLOGICALLY UNSAFE
  • If Raw Water Parameter Condition for Operation = “NA” the systems will not affect and is not affected by concentrations of that parameter typically found in drinking water
  • If Raw Water Parameter Condition for Operation = “None Allowed” Remove through adequate pre-treatment
  • If Raw Water Parameter Condition for Operation = “Not for extreme levels” The cartridge useful life may be shortened and require more frequent replacement.
  • Extreme levels of any parameter may shorten useful cartridge life
  • Stated “Max Capacity” may be reduced by overall raw water chemistry
×
 
Why Choose to Autoship?
  • Automatically re-order your favorite products on your schedule.
  • Easily change the products or shipping date for your upcoming Scheduled Orders.
  • Pause or cancel any time.